Specifications

show mpls traffic-eng link-management interfaces
MP-725
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng link-management interfaces
To display interface resource and configuration information, use the show mpls traffic-eng
link-management interfaces command in user EXEC or privileged EXEC mode.
show mpls traffic-eng link-management interfaces [in
terface-name]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display resource and configuration information for all configured interfaces.
Examples The following is sample output from the sho
w mpls traffic-eng link-management interfaces
command:
Router# show mpls traffic-eng link-management interfaces Et4/0/1
System Information::
Links Count: 2
Link ID:: Et4/0/1 (10.1.0.6)
Link Status:
Physical Bandwidth: 10000 kbits/sec
Max Reservable BW: 5000 kbits/sec (reserved:0% in, 60% out)
MPLS TE Link State: MPLS TE on, RSVP on, admin-up, flooded
Inbound Admission: reject-huge
Outbound Admission: allow-if-room
Admin. Weight: 10 (IGP)
IGP Neighbor Count: 1
IGP Neighbor: ID 0001.0000.0001.02, IP 10.0.0.0 (Up)
Flooding Status for each configured area [1]:
IGP Area[1]: isis level-1: flooded
interface-name (Optional) Displays information only for the specified interface.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T The command output was modified.
12.2(28)SB The command output was enhanced to display the Shared Risk Link Group
(
SRLG) membership of links.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.