Specifications

show mpls traffic-eng link-management interfaces
MP-726
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The following is sample output from the show mpls traffic-eng link-management interfaces command
when SRLGs are configured:
Router# show mpls traffic-eng link-management interfaces pos3/1
System Information::
Links Count: 11
Link ID:: PO3/1 (10.0.0.33)
Link Status:
SRLGs: 1 2
Physical Bandwidth: 2488000 kbits/sec
Max Res Global BW: 20000 kbits/sec (reserved:0% in, 0% out)
Max Res Sub BW: 5000 kbits/sec (reserved:0% in, 0% out)
MPLS TE Link State: MPLS TE on, RSVP on, admin-up, flooded
Inbound Admission: allow-all
Outbound Admission: allow-if-room
Admin. Weight: 10 (IGP)
IGP Neighbor Count: 1
IGP Neighbor: ID 0000.0000.0004.00, IP 10.0.0.34 (Up)
Flooding Status for each configured area [1]:
IGP Area[1]: isis level-2: flooded
Table 140 describes the significant fields shown in the displays.
Ta b l e 140 show mpls traffic-eng link-management interfaces Field Descriptions
Field Description
Links Count Number of links that were enabled for use with Multiprotocol Label
S
witching (MPLS) traffic engineering.
Link ID Index of the link.
SRLGs The SRLGs to which the link belongs.
Physical Bandwidth Link’s bandwidth capacity, in kBps.
Max Reservable BW Amount of reservable bandwidth, in kb/s, on this link.
Max Res Global BW Amount of reservable bandwidth, in kb/s, available for the global
pool
.
Max Res Sub BW Amount of reservable bandwidth, in kb/s, available for the subpool.
MPLS TE Link State The status of the MPLS link.
Inbound Admission Link admission policy for inbound tunnels.
Outbound Admission Link admission policy for outbound tunnels.
Admin. Weight Administrative weight associated with this link.
IGP Neighbor Count Number of Interior Gateway Protocol (IGP) neighbors directly
r
eachable over this link.
IGP Neighbor IGP neighbor on this link.
Flooding Status for each
co
nfigured area
Flooding status for the specified configured area.