Specifications

show mpls traffic-eng link-management summary
MP-728
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng link-management summary
To display a summary of link management information, use the show mpls traffic-eng
link-management summary command in user EXEC or privileged EXEC mode.
show mpls traffic-eng link-management summary [in
terface-name]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w mpls traffic-eng link-management summary command:
Router# show mpls traffic-eng link-management summary
System Information::
Links Count: 2
Flooding System: enabled
IGP Area ID:: isis level-1
Flooding Protocol: ISIS
Flooding Status: data flooded
Periodic Flooding: enabled (every 180 seconds)
Flooded Links: 1
IGP System ID: 0001.0000.0001.00
MPLS TE Router ID: 10.106.0.6
IGP Neighbors: 1
Link ID:: Et4/0/1 (10.1.0.6)
Link Status:
Physical Bandwidth: 10000 kbits/sec
Max Reservable BW: 5000 kbits/sec (reserved:0% in, 60% out)
MPLS TE Link State: MPLS TE on, RSVP on, admin-up, flooded
Inbound Admission: reject-huge
Outbound Admission: allow-if-room
Admin. Weight: 10 (IGP)
IGP Neighbor Count: 1
Link ID:: AT0/0.2 (10.42.0.6)
Link Status:
Physical Bandwidth: 155520 kbits/sec
Max Reservable BW: 5000 kbits/sec (reserved:0% in, 0% out)
MPLS TE Link State: MPLS TE on, RSVP on
interface-name Specific interface for which information will be displayed.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T The command output was modified.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH The output was enhanced to display Internet Gateway Protocol (IGP) recovery
s
tatus provided by the Cisco IOS Software Modularity: MPLS Layer 3 VPNs
feature.