Specifications

show mpls traffic-eng lsp attributes
MP-731
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng lsp attributes
To display global label switched path (LSP) attribute lists, use the show mpls traffic-eng lsp attributes
command in user EXEC or privileged EXEC mode.
show mpls traffic-eng lsp attributes [name string] [int
ernal]
Syntax Description
Command Default If no keywords or arguments are specified, all LSP attribute lists are displayed.
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display information about all LSP attribute lists or a specific LSP attribute list.
Examples The following example shows output from the sho
w mpls traffic-eng lsp attributes command:
Router# show mpls traffic-eng lsp attributes
LIST list1
affinity 0xFF mask 0xFFFFFFFF
auto-bw collect-bw
bandwidth 12
protection fast-reroute bw-protect
lockdown
priority 2 2
record-route LIST 2
bandwidth 5000
LIST hipriority
priority 0 0
!
Table 143 describes the significant fields shown in the display.
name (Optional) Identifies a specific LSP attribute list.
string Describes the string argument.
internal (Optional) Displays LSP atrribute list internal information.
Release Modification
12.0(26)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Cisco IOS XE
Re
lease 2.1
This command was integrated into Cisco IOS XE Release 2.1.