Specifications

show mpls traffic-eng process-restart iprouting
MP-733
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng process-restart iprouting
To display the status of IP routing and Multiprotocol Label Switching (MPLS) traffic engineering
synchronization after an IP routing process restart, use the show mpls traffic-eng process-restart
iprouting command in user EXEC or privileged EXEC mode.
show mpls traffic-eng process-restart ip
routing
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command displays information about the synchronization between the IP routing process and
M
PLS TE that you can provide to your technical support representative when you are reporting a
problem.
All counters are set to zero when the system process initializes and are not reset no matter how often the
IP
routing process restarts.
The following is sample output from the s
how mpls traffic-eng process-restart iprouting command
when an IP routing process has restarted normally:
Router# show mpls traffic-eng process-restart iprouting
IP Routing Restart Statistics:
Current State: NORM
Flushing State: IDLE
State Entered Count Timestamp Timestamp Timestamp
INIT 1 05/10/06-13:07:01
NORM 3 05/10/06-13:07:10 05/10/06-13:10:45 05/10/06-13:11:5
NORM-SPCT 0
AWAIT-CFG 2 05/10/06-13:10:32 05/10/06-13:11:45
CFG 2 05/10/06-13:10:32 05/10/06-13:11:45
CMPL-FLSH 0
NCMPL-FLSH 2 05/10/06-13:10:32 05/10/06-13:11:45
NCMPL-FLSHD 2 05/10/06-13:10:32 05/10/06-13:11:45
Stuck State Count Timestamp Timestamp Timestamp
No Stuck states encountered
Counter Count Timestamp Timestamp Timestamp
Reg Succeed 40 05/10/06-13:11:51
05/10/06-13:11:45 05/10/06-13:11:45
Reg Fail 0
Incarnation 5 05/10/06-13:11:45 05/10/06-13:11:45 05/10/06-13:10:37
Flushing 2 05/10/06-13:10:32 05/10/06-13:11:45
Release Modification
12.2(33)SXH This command was introduced.