Specifications

show mpls traffic-eng topology
MP-735
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng topology
To display the Multiprotocol Label Switching (MPLS) traffic engineering global topology as currently
known at the node, use the show mpls traffic-eng topology command in user EXEC or privileged EXEC
mo
de.
show mpls traffic-eng topology [ar
ea area-id | level-1 | level-2] [ip-address [brief | internal] |
igp-id {isis nsapaddr | ospf ip-address [network | router]} [brief] | srlg]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
area (Optional) Restricts output to an Open Shortest Path First (OSPF)
ar
ea.
area-id The OSPF area ID. The range is from 0 to 4294967295.
level-1 (Optional) Restricts output to a System-to-Intermediate System
(
IS-IS) level-1.
level-2 (Optional) Restricts output to an IS-IS level-2.
ip-address (Optional) The node by the IP address (router identifier to interface
a
ddress).
brief (Optional) Provides a less detailed version of the topology.
internal (Optional) Specifies to use the internal format.
igp-id (Optional) Specifies the node by Interior Gateway Protocol (IGP)
r
outer identifier.
isis nsap
addr Specifies the node by router identification if using Intermediate
IS-IS.
ospf i
p-address Specifies the node by router identifier if using OSPF.
network (Optional) Specifies the node type as network.
router (Optional) Specifies the node type as router.
srlg (Optional) Displays Shared Risk Link Groups (SRLG) membership
f
or each link in a topology.
Release Modification
12.0(5)S This command was introduced.
12.0(11)ST This command was modified. The single “Reservable” column was replaced
b
y two columns: one each for “global pool” and for “subpool.”
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.2(28)SB This command was modified. The ar
ea, level-1, and level-2 keywords were
added.