Specifications

show mpls traffic-eng topology path
MP-739
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Examples The following is sample output from the show mpls traffic-eng topology path command:
Router # show mpls traffic-eng topology path Tunnel1 bandwidth 1000
Query Parameters:
Destination:10.112.0.12
Bandwidth:1000
Priorities:1 (setup), 1 (hold)
Affinity:0x0 (value), 0xFFFF (mask)
Query Results:
Min Bandwidth Along Path:2000 (kbps)
Max Bandwidth Along Path:5000 (kbps)
Hop 0:10.1.0.6 :affinity 00000000, bandwidth 2000 (kbps)
Hop 1:10.1.0.10 :affinity 00000000, bandwidth 5000 (kbps)
Hop 2:10.43.0.10 :affinity 00000000, bandwidth 2000 (kbps)
Hop 3:10.112.0.12
Table 146 describes the significant fields shown in the display.
Ta b l e 146 show mpls traffic-eng topology path Field Descriptions
Field Description
Destination IP address of the path’s destination.
Bandwidth Amount of available bandwidth that a suitable path requires.
Priorities Setup and hold priorities used to acquire bandwidth.
Affinity Link attributes for which the path has an affinity.
Min Bandwidth Along Path Minimum amount of bandwidth configured for a path.
Max Bandwidth Along Path Maximum amount of bandwidth configured for a path.
Hop Information about each link in the path.