Specifications

show mpls traffic-eng tunnels
MP-745
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Backup Tu5711 to LSP nhop
Tu5711: out i/f: PO1/1, label: implicit-null
LSP signalling info:
Original: out i/f: PO1/0, label: 12304, nhop: 10.1.1.7
With FRR: out i/f: Tu5711, label: 12304
LSP bw: 6000 kbps, Backup level: any unlimited, type: any pool
Router_t2
LSP Head, Tunnel2, Admin: up, Oper: up
Src 10.55.55.55, Dest 10.88.88.88, Instance 2
Fast Reroute Protection: Requested
Outbound: FRR Ready
Backup Tu578 to LSP nhop
Tu578: out i/f: PO1/0, label: 12306
LSP signalling info:
Original: out i/f: PO3/3, label: implicit-null, nhop: 10.3.3.8
With FRR: out i/f: Tu578, label: implicit-null
LSP bw: 100 kbps, Backup level: any unlimited, type: any pool
r9_t1
LSP Midpoint, signalled, connection up
Src 10.9.9.9, Dest 10.88.88.88, Instance 2347
Fast Reroute Protection: Requested
Inbound: FRR Inactive
LSP signalling info:
Original: in i/f: PO1/2, label: 12304, phop: 10.205.0.9
Outbound: FRR Ready
Backup Tu5711 to LSP nhop
Tu5711: out i/f: PO1/1, label: implicit-null
LSP signalling info:
Original: out i/f: PO1/0, label: 12305, nhop: 10.1.1.7
With FRR: out i/f: Tu5711, label: 12305
LSP bw: 10 kbps, Backup level: any unlimited, type: any pool
The following is sample output from the show mpls traffic-eng tunnels tunnel command. This
command displays information about just a single tunnel.
Router# show mpls traffic-eng tunnels tunnel 1
Name: swat76k1_t1 (Tunnel1) Destination: 10.0.0.4
Status:
Admin: admin-down Oper: down Path: not valid Signalling: Down
path option 1, type explicit gi7/4-R4
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Shortest Unconstrained Path Info:
Path Weight: 2 (TE)
Explicit Route: 10.1.0.1 10.1.0.2 172.0.0.1 192.0.0.4
History:
Tunnel:
Time since created: 13 days, 52 minutes
Number of LSP IDs (Tun_Instances) used: 0 swat76k1#
swat76k1#sh mpls traf tun property ?
auto-tunnel auto-tunnel created tunnels
backup-tunnel Tunnels used as fast reroute
fast-reroute Tunnels protected by fast reroute
The following is sample output from the show mpls traffic-eng tunnels accounting command. This
command displays the rate of the traffic flow for the tunnels.