Specifications

show mpls traffic-eng tunnels
MP-746
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Router# show mpls traffic-eng tunnels accounting
Tunnel1 (Destination 10.103.103.103; Name iou-100_t1)
5 minute output rate 0 kbits/sec, 0 packets/sec
Tunnel2 (Destination 10.103.103.103; Name iou-100_t2)
5 minute output rate 0 kbits/sec, 0 packets/sec Tunnel100 (Destination 10.101.101.101;
Name iou-100_t1
00)
5 minute output rate 0 kbits/sec, 0 packets/sec Totals for 3 Tunnels
5 minute output rate 0 kbits/sec, 0 packets/sec
MPLS Traffic Engineering Point-to-Multipoint Command Examples
When the MPLS TE P2MP feature is configured, the show mpls traffic-eng tunnels command
categorizes the output as follows:
• P2P tunnels/LSPs
• P2MP tunnels
• P2MP sub-LSPs
The following show
mpls traffic-eng tunnels brief command displays P2MP tunnel and sub-LSP
information:
Router# show mpls traffic-eng tunnels brief
Signalling Summary:
LSP Tunnels Process: running
Passive LSP Listener: running
RSVP Process: running
Forwarding: enabled
Periodic reoptimization: every 60 seconds, next in 5 seconds
Periodic FRR Promotion: Not Running
Periodic auto-bw collection: disabled
P2P TUNNELS/LSPs:
TUNNEL NAME DESTINATION UP IF DOWN IF STATE/PROT
p2p-LSP 10.2.0.1 - Se2/0 up/up
Displayed 2 (of 2) heads, 0 (of 0) midpoints, 0 (of 0) tails
P2MP TUNNELS:
DEST CURRENT
INTERFACE STATE/PROT UP/CFG TUNID LSPID
Tunnel2 up/up 3/10 2 1
Tunnel5 up/down 1/10 5 2
Displayed 2 (of 2) P2MP heads
P2MP SUB-LSPS:
SOURCE TUNID LSPID DESTINATION SUBID ST UP IF DOWN IF
10.1.0.1 2 1 10.2.0.1 1 up head Se2/0
10.1.0.1 2 1 10.3.0.199 2 up head Et2/0
10.1.0.1 2 1 19.4.0.1 2 up head s2/0
10.1.0.1 2 2 1 9.4.0.1 2 up head s2/0
10.1.0.1 5 2 10.5.0.1 7 up head e2/0
100.100.100.100 1 3 200.200.200.200 1 up ge2/0 s2/0
100.100.100.100 1 3 10.1.0.1 1 up e2/0 tail
Displayed 7 P2MP sub-LSPs:
5 (of 5) heads, 1 (of 1) midpoints, 1 (of 1) tails
The following show mpls traffic-eng tunnels statistics command displays status information about
P2MP path and LSPs for Tunnel 100:
Router# show mpls traffic-eng tunnels statistics