Specifications

show mpls traffic-eng tunnels
MP-747
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Tunnel100 (Name p2mp-1_t100)
Management statistics:
Path: 0 no path, 0 path no longer valid, 0 missing ip exp path
97 path changes, 306 path lookups
0 protection pathoption_list errors
0 invalid inuse popt in pathoption list
0 loose path reoptimizations, triggered by PathErrors
State: 1 transitions, 0 admin down, 0 oper down
Signalling statistics:
Opens: 1 succeeded, 0 timed out, 0 bad path spec
0 other aborts
LSP Activations: 97 succeeded
Last Failure: No path that satisfy tunnel constraints
Failures stats:
5: No path that satisfy tunnel constraints
Errors: 0 no b/w, 288 no route, 0 admin, 0 remerge detected
0 bad exp route, 0 rec route loop, 0 frr activated
0 other
The following show mpls traffic-eng tunnels summary command displays information about P2MP
LSPs and sub-LSPs:
Router# show mpls traffic-eng tunnels statistics
Signalling Summary:
LSP Tunnels Process: running
Passive LSP Listener: running
RSVP Process: running
Forwarding: enabled
Periodic reoptimization: every 3600 seconds, next in 2599 seconds
Periodic FRR Promotion: Not Running
Periodic auto-bw collection: disabled
P2P:
Head: 10 interfaces, 0 active signalling attempts, 0 established
0 activations, 0 deactivations
0 SSO recovery attempts, 0 SSO recovered
Midpoints: 0, Tails: 1
P2MP:
Head: 6 interfaces, 3 active signalling attempts, 3 established
291 sub-LSP activations, 288 sub-LSP deactivations
97 LSP successful activations, 96 LSP deactivations
5 LSP failed activations
SSO: Unsupported
Midpoints: 0, Tails: 0
The following is sample output from the show mpls traffic-eng tunnels command for a tunnel named
t1. The output includes an adjustment threshold of 5 percent, an overflow limit of 4, an overflow
threshold of 25 percent, and an overflow threshold exceeded of 1.
Router# show mpls traffic-eng tunnels name t1
Name:tagsw4500-9_t1 (Tunnel1) Destination:10.0.0.4
Status:
Admin:up Oper:up Path:valid Signalling:connected
path option 1, type explicit pbr_south (Basis for Setup, path weight 30)
path option 2, type dynamic
Config Parameters:
Bandwidth:13 kbps (Global) Priority:7 7 Affinity:0x0/0xFFFF
AutoRoute: disabled LockDown:disabled Loadshare:13 bw-based
auto-bw:(300/265) 53 Bandwidth Requested: 13
Adjustment threshold: 5%