Specifications

show mpls traffic-eng tunnels
MP-748
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Overflow Limit: 4 Overflow Threshold: 25%
Overflow Threshold Crossed: 1
Sample Missed: 1 Samples Collected: 1
Active Path Option Parameters:
State: dynamic path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : Serial3/0, 18
RSVP Signalling Info:
Src 10.0.0.1, Dst 10.0.0.4, Tun_Id 2, Tun_Instance 2
RSVP Path Info:
My Address: 10.105.0.1
Explicit Route: 10.105.0.2 104.105.0.1 10.0.0.4
Record Route: NONE
Tspec: ave rate=13 kbits, burst=1000 bytes, peak rate=13 kbits
Record Route: NONE
Tspec: ave rate=13 kbits, burst=1000 bytes, peak rate=13 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=13 kbits, burst=1000 bytes, peak rate=13 kbits
Shortest Unconstrained Path Info:
Path Weight: 128 (TE)
Explicit Route: 10.105.0.2 104.105.0.1 10.0.0.4
History:
Tunnel:
Time since created: 7 minutes, 56 seconds
Time since path change: 7 minutes, 18 seconds
Number of LSP IDs (Tun_Instances) used: 2
Number of Auto-bw Adjustment resize requests: 1
Time since last Auto-bw Adjustment resize request: 1 minutes, 7 seconds
Number of Auto-bw Overflow resize requests: 1
Time since last Auto-bw Overflow resize request: 52 seconds
Current LSP:
Uptime: 52 seconds
Selection: reoptimization
Prior LSP:
ID: path option 1 [1]
Removal Trigger: configuration changed
The following sample output from the show mpls traffic-eng tunnels tunnel command for Cisco IOS
Release 12.2(33)SRE shows path protection information. This command displays information about a
s
ingle tunnel.
Router# show mpls traffic-eng tunnels tunnel 1
Name: iou-100_t2 (Tunnel2) Destination: 10.10.0.2
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 10, type explicit primary1 (Basis for Setup, path weight 10)
Path Protection: 0 Common Link(s), 0 Common Node(s)
path protect option 10, type list name secondary-list
Inuse path-option 10, type explicit secondary1 (Basis for Protect, path weight 20)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute announce: enabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: explicit path option 10 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : Ethernet7/0, implicit-null