Specifications

show mpls traffic-eng tunnels summary
MP-754
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng tunnels summary
To display summary information about tunnels, use the show mpls traffic-eng tunnels summary
command in user EXEC or privileged EXEC mode.
show mpls traffic-eng tunnels summary
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use the show
mpls traffic-eng tunnels summary command to display the number of tunnel headends
that were attempted and successful at being recovered following a stateful switchover (SSO).
Examples The following is sample output from the sho
w mpls traffic-eng tunnels summary command:
Router# show mpls traffic-eng tunnels summary
Signalling Summary:
LSP Tunnels Process: running
Passive LSP Listener: running
RSVP Process: running
Forwarding: enabled
Head: 3 interfaces, 3 active signalling attempts, 3 established
3 activations, 3 deactivations
3 SSO recovery attempts, 3 SSO recovered
Midpoints: 1, Tails: 0
Periodic reoptimization: every 3600 seconds, next in 873 seconds
Periodic FRR Promotion: Not Running
Periodic auto-bw collection: every 300 seconds, next in 273 seconds
Table 150 describes the significant fields shown in the display.
Release Modification
12.0(5)S This command was introduced.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.0(22)S The command output was updated to display periodic Fast Reroute
i
nformation. The command is supported on the Cisco 10000 series ESRs.
12.2(18)SXD1 This command was integrated into Cisco IOS Release 12.2(18)SXD1.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA The command output was modified to display the number of tunnels that
wer
e attempted and successful in being recovered following a failover.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.