Specifications

show mpls ttfib
MP-756
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ttfib
To display information about the Multiprotocol Label Switching (MPLS) TTFIB table, use the show
mpls ttfib command in EXEC mode.
show mpls ttfib [de
tail [hardware] | vrf instance [detail]]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display information about the MPLS TTFIB table:
Router# show mpls ttfib
Local Outgoing Packets Tag LTL Dest. Destination Outgoing
Tag Tag or VC Switched Index Vlanid Mac Address Interface
4116 21 0 0xE0 1020 0000.0400.0000 PO4/1*
34 0 0x132 1019 00d0.040d.380a GE5/3
45 0 0xE3 4031 0000.0430.0000 PO4/4
4117 16 0 0x132 1019 00d0.040d.380a GE5/3*
17 0 0xE0 1020 0000.0400.0000 PO4/1
18 0 0xE3 4031 0000.0430.0000 PO4/4
4118 21 0 0xE0 1020 0000.0400.0000 PO4/1*
56 0 0xE3 4031 0000.0430.0000 PO4/4
4119 35 0 0xE3 4031 0000.0430.0000 PO4/4*
47 0 0xE0 1020 0000.0400.0000 PO4/1
detail (Optional) Displays detailed information.
hardware (Optional) Displays detailed hardware information.
vrf in
stance (Optional) Displays entries for a specified Virtual Private Network (VPN) routing
and forwarding instance (VRF).
Release Modification
12.2(17b)SXA Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Re
lease 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.