Specifications

show running interface auto-template
MP-757
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show running interface auto-template
To display configuration information for a tunnel’s interface, use the show running interface
auto-template command in privileged EXEC mode.
show running interface auto-template nu
m
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines The space before the nu
m argument is optional.
Examples The following is output from the show runni
ng interface auto-template command:
Router# show running interface auto-template 1
interface auto-template1
ip unnumbered Loopback0
no ip directed-broadcast
no keepalive
tunnel destination access-list 1
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng path-option 1 dynamic
Table 151 describes the significant fields shown in the display.
num Number of the tunnel interface for which you want to display information.
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Ta b l e 151 show running interface auto-template Field Descriptions
Field Description
ip unnumbered Loopback0 Indicates the type and number of another interface on which
t
he router has an assigned IP address. It cannot be another
unnumbered interface.
no ip directed-broadcast Indicates that no IP broadcast addresses are used for the
a
utotunnel interface.
no keepalive Indicates that no keepalives are set for the autotunnel
in
terface.