Specifications

show running interface auto-template
MP-758
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Related Commands
tunnel destination access-list 1 Indicates that access list 1 is the access list that the template
interface will use for obtaining the autotunnel interface
destination address.
tunnel mode mpls traffic-eng Indicates that the mode of the autotunnel is set to
Mu
ltiprotocol Label Switching (MPLS) for traffic
engineering.
tunnel mpls traffic-eng autoroute
a
nnounce
Indicates that the Interior Gateway Protocol (IGP) should use
the tunnel (if the tunnel is up) in its enhanced shortest path
first (SPF) calculation.
tunnel mpls traffic-eng path-option 1
d
ynamic
Indicates that a path option (path-option1) for the label
switch router (LSR) for the MPLS traffic engineering (TE)
mesh tunnel is configured dynamically.
Table 151 show running interface auto-template Field Descriptions (continued)
Field Description
Command Description
interface auto-template Creates the template interface.
tunnel destination access-list Specifies the access list that the template interface will use for
o
btaining the mesh tunnel interface destination address.