Specifications

show tech-support mpls
MP-762
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show tech-support mpls
To generate a report of all Multiprotocol Label Switching (MPLS)-related information, use the show
tech-support mpls command in privileged EXEC mode.
show tech-support mpls [vr
f vrf-name]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is useful when you contact technical support personnel with questions regarding MPLS.
Th
e show tech-support mpls command generates a series of reports. The show tech-support mpls
command is equivalent to issuing the following commands:
MPLS Forwarding Information Commands
show adjacency detail
show cef drop show cef events
show cef not-cef-switched
show cef state
show interface accounting | exclude sab
show interfaces statistic | exclude sabl
show ip cef adjacency discard
show ip cef adjacency drop
show ip cef adjacency glean
show ip cef adjacency null
show ip cef adjacency punt
show ip cef detail internal
show ip cef inconsistency
show ip cef summary
show ip cef unresolved internal
show ip interfaces
show ip route
show ip traffic
show mpls forwarding-table detail
show mpls interfaces all
vrf vr
f-name (Optional) Displays MPLS information about the specified VPN routing
and forwarding (VRF) instance.
Release Modification
12.2(25)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.