Specifications

show vrf
MP-769
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The following example displays output from the show vrf detail command when backup paths have been
created either through the Prefix Independent Convergence or Best External feature. The output of the
show vrf detail command displays the following line:
Prefix protection with additional path enabled
Router# show vr
f detail
VRF vpn1 (VRF Id = 1); default RD 1:1; default VPNID <not set>
Interfaces:
Et1/1
Address family ipv4 (Table ID = 1 (0x1)):
Export VPN route-target communities
RT:1:1
Import VPN route-target communities
RT:1:1
No import route-map
No export route-map
VRF label distribution protocol: not configured
VRF label allocation mode: per-prefix
Prefix protection with additional path enabled
Address family ipv6 not active.
The following is the sample output from the show vrf lock command that displays VPN lock
information:
Router# show vrf lock
VRF Name: Mgmt-intf; VRF id = 4085 (0xFF5)
VRF lock count: 3
Lock user: RTMGR, lock user ID: 2, lock count per user: 1
Caller PC tracebacks:
Trace backs: :10000000+44DAEB4 :10000000+21E83AC :10000000+45A9F04 :108
Lock user: CEF, lock user ID: 4, lock count per user: 1
Caller PC tracebacks:
Trace backs: :10000000+44DAEB4 :10000000+21E83AC :10000000+45A9F04 :10C
Lock user: VRFMGR, lock user ID: 1, lock count per user: 1
Caller PC tracebacks:
Trace backs: :10000000+44DAEB4 :10000000+21E83AC :10000000+21EAD18 :10C
VRF Name: vpn1; VRF id = 1 (0x1)
VRF lock count: 3
Lock user: RTMGR, lock user ID: 2, lock count per user: 1
Caller PC tracebacks:
Trace backs: :10000000+44DAEB4 :10000000+21E83AC :10000000+45A9F04 :10C
Lock user: CEF, lock user ID: 4, lock count per user: 1
Caller PC tracebacks:
Trace backs: :10000000+44DAEB4 :10000000+21E83AC :10000000+45A9F04 :100
Ta b l e 154 show vrf detail Field Descriptions
Field Description
default RD 100:1 The RD given to this VRF.
Interfaces: Interfaces to which the VRF is attached.
Export VPN route-target communities
RT:100:1
Route-target VPN extended communities to be exported.
Import VPN route-target communities
RT:100:1
Route-target VPN extended communities to be
im
ported.