Specifications

show xconnect
MP-772
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines The sho
w xconnect command can be used to display, sort, and filter basic information about all xconnect
attachment circuits and pseudowires.
You can use the show
xconnect command output to help determine the appropriate steps required to
troubleshoot an xconnect configuration problem. More specific information about a particular type of
xconnect can be displayed using the commands listed in the “Related Commands” table.
all Displays all xconnect information associated with the specified peer IP
ad
dress.
vcid Displays xconnect information associated with the specified peer IP address
an
d the specified VC ID.
vcid-value Specifies the VC ID value.
pwmib Displays information about pseudowires Management Information Base
(MI
B).
memory Displays information about the xconnect memory usage.
rib Displays information about the pseudowire Routing Information Base (RIB).
pwmib Displays MIB information for all xconnect attachment circuits and
p
seudowires.
Release Modification
12.0(31)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SRB This command was modified. The ri
b keyword was added.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.
Cisco IOS
XE Release 2.1
This command was integrated into Cisco IOS XE Release 2.1.
12.4(24)T This command was modified in a release earlier than Cisco IOS
Re
lease 12.4(24)T. The pwmib
keyword was added.
12.2(33)SRC This command was modified in a release earlier than Cisco IOS
Re
lease 12.2(33)SRC. The memory k
eyword was added.
12.2(33)SCC This command was integrated into Cisco IOS Release 12.2(33)SCC.