Specifications

show xconnect
MP-773
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Examples The following example shows show xconnect all command output in the brief (default) display format:
Router# show xconnect all
Legend: XC ST=Xconnect State, S1=Segment1 State, S2=Segment2 State
UP=Up, DN=Down, AD=Admin Down, IA=Inactive, SB=Standby, RV=Recovering, NH=No Hardware
XC ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP ac Et0/0(Ethernet) UP mpls 10.55.55.2:1000 UP
UP ac Se7/0(PPP) UP mpls 10.55.55.2:2175 UP
UP pri ac Se6/0:230(FR DLCI) UP mpls 10.55.55.2:2230 UP
IA sec ac Se6/0:230(FR DLCI) UP mpls 10.55.55.3:2231 DN
UP ac Se4/0(HDLC) UP mpls 10.55.55.2:4000 UP
UP ac Se6/0:500(FR DLCI) UP l2tp 10.55.55.2:5000 UP
UP ac Et1/0.1:200(Eth VLAN) UP mpls 10.55.55.2:5200 UP
UP pri ac Se6/0:225(FR DLCI) UP mpls 10.55.55.2:5225 UP
IA sec ac Se6/0:225(FR DLCI) UP mpls 10.55.55.3:5226 DN
IA pri ac Et1/0.2:100(Eth VLAN) UP ac Et2/0.2:100(Eth VLAN) UP
UP sec ac Et1/0.2:100(Eth VLAN) UP mpls 10.55.55.3:1101 UP
UP ac Se6/0:150(FR DLCI) UP ac Se8/0:150(FR DLCI) UP
The following example shows show xconnect all command output in the detailed display format:
Router# show xconnect all detail
Legend: XC ST=Xconnect State, S1=Segment1 State, S2=Segment2 State
UP=Up, DN=Down, AD=Admin Down, IA=Inactive, SB=Standby, RV=Recovering, NH=No HardwareXC
ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP ac Et0/0(Ethernet) UP mpls 10.55.55.2:1000 UP
Interworking: ip Local VC label 16
Remote VC label 16
pw-class: mpls-ip
UP ac Se7/0(PPP) UP mpls 10.55.55.2:2175 UP
Interworking: ip Local VC label 22
Remote VC label 17
pw-class: mpls-ip
UP pri ac Se6/0:230(FR DLCI) UP mpls 10.55.55.2:2230 UP
Interworking: ip Local VC label 21
Remote VC label 18
pw-class: mpls-ip
IA sec ac Se6/0:230(FR DLCI) UP mpls 10.55.55.3:2231 DN
Interworking: ip Local VC label unassigned
Remote VC label 19
pw-class: mpls-ip
SB ac Se4/0:100(FR DLCI) UP mpls 10.55.55.2:4000 SB
Interworking: none Local VC label 18
Remote VC label 19
pw-class: mpls
UP ac Se6/0:500(FR DLCI) UP l2tp 10.55.55.2:5000 UP
Interworking: none Session ID: 34183
Tunnel ID: 62083
Peer name: pe-iou2
Protocol State: UP
Remote Circuit State: UP
pw-class: l2tp
UP ac Et1/0.1:200(Eth VLAN) UP mpls 10.55.55.2:5200 UP
Interworking: ip Local VC label 17
Remote VC label 20
pw-class: mpls-ip
UP pri ac Se6/0:225(FR DLCI) UP mpls 10.55.55.2:5225 UP
Interworking: none Local VC label 19
Remote VC label 21
pw-class: mpls