Specifications

show xconnect
MP-777
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Route-Target: 10:123
Incoming RD: 10:11
Forwarder: vfi VPLS1
Origin: BGP
Provisioned: No
VPLS-ID 10.100.100.100:1234, TID 0.0.0.2
Next-Hop: 10.2.2.2, 10.3.3.3, 10.4.4.4
Hello-Source: 10.9.9.9
Route-Target: 10.111.111.111:12345, 10.8.8.8:345
Incoming RD: 10:12
Forwarder: vfi VPLS2
Origin: BGP
Provisioned: Yes
VPLS-ID 10.100.100.100:1234, TID 10.13.1.1
Next-Hop: 10.1.1.1
Hello-Source: 10.9.9.9
Route-Target: 10.111.111.111:12345
Incoming RD: 10:13
Forwarder: vfi VPLS2
Origin: BGP
Provisioned: Yes
Table 157 describes the significant fields shown in the display.
Related Commands
Ta b l e 157 show xconnect rib detail Field Descriptions
Field Description
Hello-Source The source IP address used when Label Distribution Protocol
(
LDP) hello messages are sent to the LDP peer for the
autodiscovered pseudowire.
Incoming RD The route distinguisher for the autodiscovered pseudowire.
Forwarder The VFI to which the autodiscovered pseudowire is attached.
Command Description
show atm pvc Displays all ATM PVCs and traffic information.
show atm vc Displays all ATM PVCs and SVCs and traffic information.
show atm vp Displays the statistics for all VPs on an interface or for a specific VP.
show connect Displays configuration information about drop-and-insert connections that
ha
ve been configured on a router.
show frame-relay pvc Displays statistics about PVCs for Frame Relay interfaces.
show interfaces Displays statistics for all interfaces configured on the router or access server.
show l2tun session Displays the current state of Layer 2 sessions and protocol information about
L
2TP control channels.
show mpls l2transport
binding
Displays VC label binding information.
show mpls l2transport
vc
Displays information about AToM VCs that have been enabled to route
L
ayer 2 packets on a router.