Specifications

show xtagatm cos-bandwidth-allocation
MP-778
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show xtagatm cos-bandwidth-allocation
Note Effective with Cisco IOS Release 12.4(20)T, the show xtagatm cos-bandwidth-allocation command is
not available in Cisco IOS software.
To display information about quality of service (QoS) bandwidth allocation on extended Multiprotocol
L
abel Switching (MPLS) ATM (XTagATM) interfaces, use the show xtagatm
cos-bandwidth-allocation command in user EXEC or privileged EXEC mode.
show xtagatm cos-bandwidth-allocation [xta
gatm interface-number]
Syntax Description
Defaults Available 50 percent, control 50 percent.
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display QoS bandwidth allocation information for the following QoS traffic
c
ategories:
• Available
• Standard
• Premium
• Control
Examples The following example shows output from this command:
Router# show xtagatm cos-bandwidth-allocation xtagatm 123
CoS Bandwidth allocation
available 25%
standard 25%
premium 25%
control 25%
Table 158 describes the significant fields shown in the display.
xtagatm (Optional) Specifies the XTagATM interface number.
interface-number Number of the XTagATM interface. Range: 0 to 2147483647.
Release Modification
12.0(5)T This command was introduced.
12.4(20)T This command was removed.