Specifications

show xtagatm cross-connect
MP-780
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show xtagatm cross-connect
Note Effective with Cisco IOS Release 12.4(20)T, the show xtagatm cross-connect command is not available
in Cisco IOS software.
To display information about the Label Switch Controller (LSC) view of the cross-connect table on the
r
emotely controlled ATM switch, use the show xtagatm cross-connect command in user EXEC or
privileged EXEC mode.
show xtagatm cross-connect [tr
affic] [interface interface [vpi vci] | descriptor descriptor
[vp
i vci]]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Examples Each connection is listed twice in the output from the sho
w xtagatm cross-connect command, because
it shows each interface that is linked by the connection.
The following is sample output from the sho
w xtagatm cross-connect command:
Router# show xtagatm cross-connect
Phys Desc VPI/VCI Type X-Phys Desc X-VPI/VCI State
10.1.0 1/37 -> 10.3.0 1/35 UP
10.1.0 1/34 -> 10.3.0 1/33 UP
10.1.0 1/33 <-> 10.2.0 0/32 UP
10.1.0 1/32 <-> 10.3.0 0/32 UP
10.1.0 1/35 <- 10.3.0 1/34 UP
10.2.0 1/57 -> 10.3.0 1/49 UP
10.2.0 1/53 -> 10.3.0 1/47 UP
10.2.0 1/48 <- 10.1.0 1/50 UP
10.2.0 0/32 <-> 10.1.0 1/33 UP
10.3.0 1/34 -> 10.1.0 1/35 UP
traffic (Optional) Displays receive and transmit cell counts for each connection.
interface in
terface (Optional) Displays only connections with an endpoint of the specified
interface.
vpi vci (Optional) Displays only detailed information on the endpoint with the
s
pecified virtual path identifier (VPI)/virtual channel identifier (VCI) on the
specified interface.
descriptor de
scriptor (Optional) Displays only connections with an endpoint on the interface with
the specified physical descriptor.
Release Modification
12.0(5)T This command was introduced.
12.4(20)T This command was removed.