Specifications

show xtagatm cross-connect
MP-781
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
10.3.0 1/49 <- 10.2.0 1/57 UP
10.3.0 1/47 <- 10.2.0 1/53 UP
10.3.0 1/37 <- 10.1.0 1/38 UP
10.3.0 1/35 <- 10.1.0 1/37 UP
10.3.0 1/33 <- 10.1.0 1/34 UP
10.3.0 0/32 <-> 10.1.0 1/32 UP
Table 159 describes the significant fields shown in the display.
The following is sample output from the show
xtagatm cross-connect command for a single endpoint:
Router# show xtagatm cross-connect descriptor 10.1.0 1 42
Ta b l e 159 show xtagatm cross-connect Field Descriptions
Field Description
Phys desc Physical descriptor. A switch-supplied string identifying the interface on
w
hich the endpoint exists.
VPI/VCI Virtual path identifier and virtual channel identifier for this endpoint.
Type The type can be one of the following:
A right arrow (->) indicates an ingress endpoint, where traffic is received
i
nto the switch.
A left arrow (<-) indicates an egress endpoint, where traffic is transmitted
f
rom the interface.
A bidirectional arrow (<->) indicates that traffic is both transmitted and
re
ceived at this endpoint.
X-Phys Desc Physical descriptor for the interface of the other endpoint belonging to the
c
ross-connect.
X-VPI/VCI Virtual path identifier and virtual channel identifier of the other endpoint
bel
onging to the cross-connect.
State Indicates the status of the cross-connect to which this endpoint belongs. The
st
ate is typically UP; other values, all of which are transient, include the
following:
• DOWN
• ABOUT_TO_DOWN
• ABOUT_TO_CONNECT
• CONNECTING
• ABOUT_TO_RECONNECT
• RECONNECTING
• ABOUT_TO_RESYNC
• RESYNCING
• NEED_RESYNC_RETRY
• ABOUT_TO_RESYNC_RETRY RETRYING_RESYNC
• ABOUT_TO_DISCONNECT
• DISCONNECTING