Specifications

show xtagatm cross-connect
MP-782
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Phys desc: 10.1.0
Interface: n/a
Intf type: switch control port
VPI/VCI: 1/42
X-Phys desc: 10.2.0
X-Interface: XTagATM0
X-Intf type: extended tag ATM
X-VPI/VCI: 2/38
Conn-state: UP
Conn-type: input/output
Cast-type: point-to-point
Rx service type: Tag COS 0
Rx cell rate: n/a
Rx peak cell rate: 10000
Tx service type: Tag COS 0
Tx cell rate: n/a
Tx peak cell rate: 10000
Table 160 describes the significant fields shown in the display.
Ta b l e 160 show xtagatm cross-connect descriptor Field Descriptions
Field Description
Phys desc Physical descriptor. A switch-supplied string identifying the interface on
w
hich the endpoint exists.
Interface The (Cisco IOS) interface name.
Intf type Interface type. Can be either extended Multiprotocol Label Switched
(MP
LS) ATM (XTagATM) or a switch control port.
VPI/VCI Virtual path identifier and virtual channel identifier for this endpoint.
X-Phys desc Physical descriptor for the interface of the other endpoint belonging to the
cro
ss-connect.
X-Interface The (Cisco IOS) name for the interface of the other endpoint belonging to
t
he cross-connect.
X-Intf type Interface type for the interface of the other endpoint belonging to the
cro
ss-connect.
X-VPI/VCI Virtual path identifier and virtual channel identifier of the other endpoint
b
elonging to the cross-connect.