Specifications

Multiprotocol Label Switching Commands
clear mpls traffic-eng auto-tunnel mesh
MP-42
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
clear mpls traffic-eng auto-tunnel mesh
To remove all mesh tunnel interfaces and re-create them, use the clear mpls traffic-eng auto-tunnel
mesh command in privileged EXEC mode.
clear mpls traffic-eng auto-tunnel mesh
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Examples The following example shows how to remove all mesh tunnel interfaces and re-create them:
Router# clear mpls traffic-eng auto-tunnel mesh
Related Commands
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
interface auto-template Creates the template interface.