Specifications

Multiprotocol Label Switching Commands
clear mpls traffic-eng auto-tunnel backup
MP-43
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
clear mpls traffic-eng auto-tunnel backup
To remove all the backup autotunnels and re-create them, use the clear mpls traffic-eng auto-tunnel
backup command in global configuration mode.
clear mpls traffic-eng auto-tunnel backup
Syntax Description This command has no arguments or keywords.
Command Default No default behavior or values
Command Modes Global configuration
Command History
Examples The following example removes all backup autotunnels and re-creates them:
Router# clear mpls traffic-eng auto-tunnel backup
Related Commands
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
show ip rsvp fast-reroute Displays information about fast reroutable
pri
mary tunnels and their corresponding
backup tunnels that provide protection.