Specifications

snmp-server host
MP-814
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
udp-port (Optional) Specifies that SNMP traps or informs are to be sent to an NMS
host.
port (Optional) UDP port number of the NMS host. The default is 162.
notification-type (Optional) Type of notification to be sent to the host. If no type is specified,
all a
vailable notifications are sent. The notification type can be one or more
of the following keywords:
• bgp—Sends Border Gateway Protocol (BGP) state change notifications.
• calltracker—Sends Call Tracker call-start/call-end notifications.
• cef — Sends notifications related to Cisco Express Forwarding.
• config—Sends configuration change notifications.
• cpu—Sends CPU-related notifications.
• director—Sends notifications related to DistributedDirector.
• dspu—Sends downstream physical unit (DSPU) notifications.
• eigrp—Sends Enhanced Interior Gateway Routing Protocol (EIGRP)
stuck-in-active (SIA) and neighbor authentication failure notifications.
• entity—Sends Entity MIB modification notifications.
• envmon—Sends Cisco enterprise-specific environmental monitor
notifications when an environmental threshold is exceeded.
• flash—Sends flash media insertion and removal notifications.
• frame-relay—Sends Frame Relay notifications.
• hsrp—Sends Hot Standby Routing Protocol (HSRP) notifications.
• iplocalpool—Sends IP local pool notifications.
• ipmobile—Sends Mobile IP notifications.
• ipsec—Sends IP Security (IPsec) notifications.
• isdn—Sends ISDN notifications.
• l2tun-pseudowire-status—Sends pseudowire state change
notifications.
• l2tun-session—Sends Layer 2 tunneling session notifications.
• license—Sends licensing notifications as traps or informs.
• llc2—Sends Logical Link Control, type 2 (LLC2) notifications.
• memory—Sends memory pool and memory buffer pool notifications.
• mpls-ldp—Sends Multiprotocol Label Switching (MPLS) Label
Distribution Protocol (LDP) notifications indicating status changes in
LDP sessions.