Specifications

Multiprotocol Label Switching Commands
clear mpls traffic-eng auto-tunnel primary
MP-44
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
clear mpls traffic-eng auto-tunnel primary
To remove all the primary autotunnels and re-create them, use the clear mpls traffic-eng auto-tunnel
primary command in global configuration mode.
clear mpls traffic-eng auto-tunnel primary
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration
Command History
Examples The following example removes all primary autotunnels and re-creates them:
Router# clear mpls traffic-eng auto-tunnel primary
Related Commands
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
show ip rsvp fast-reroute Displays information about fast reroutable
pri
mary tunnels and their corresponding
backup tunnels that provide protection.