Specifications

status redundancy
MP-822
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
status redundancy
To designate one pseudowire as the master or slave to display status information for both active and
backup pseudowires, use the status redundancy command in pseudowire class configuration mode. To
disable the pseudowire as the master or slave, use the no form of this command.
status redundancy {ma
ster | slave}
no status redundancy {ma
ster | slave}
Syntax Description
Command Default The pseudowire is in slave mode.
Command Modes Pseudowire-class configuration mode (config-pw)
Command History
Usage Guidelines One pseudowire must be the master and the other must be assigned the slave. You cannot configure both
pse
udowires as master or slave.
Examples The following example designates the pseudowire as the master:
Router(config-pw)# status redundancy master
Related Commands
master Designates one pseudowire to work as the master.
slave Designates one pseudowire to work as the slave.
Release Modification
Cisco IOS XE Release
2.
3
This command was introduced.
Command Description
show xconnect Displays information about xconnect attachment circuits and pseudowires