Specifications

switching tlv
MP-823
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
switching tlv
To advertise the switching point type-length variable (TLV) in the label binding, use the switching tlv
command in pseudowire class configuration mode. To disable the display of the TLV, use the no form of
this command.
switching tlv
no switching tlv
Syntax Description This command has no arguments or keywords.
Command Default Switching point TLV data is advertised to peers.
Command Modes Pseudowire class configuration (config-pw-class)
Command History
Usage Guidelines The pseudowire switching point TLV information includes the following information:
• Pseudowire ID of the last pseudowire segment traversed
• Pseudowire switching point description
• Local IP address of the pseudowire switching point
• Remote IP address of the last pseudowire switching point that was crossed or the T-PE router
By default, switching point TLV data is advertised to peers.
Examples The following example enables the display of the pseudowire switching TLV:
Router(config)# pseudowire-class atom
Router(config-pw-class)# switching tlv
Related Commands
Release Modification
Cisco IOS XE Release
2.
3
This command was introduced.
Command Description
show mpls l2transport
binding
Displays switching point TLV information.
show mpls l2transport
vc
detail
Displays switching point TLV information.