Specifications

Multiprotocol Label Switching Commands
clear mpls traffic-eng tunnel counters
MP-45
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
clear mpls traffic-eng tunnel counters
To clear the counters for all Multiprotocol Label Switching (MPLS) traffic engineering tunnels, use the
clear mpls traffic-eng tunnel counters command in privileged EXEC mode.
clear mpls traffic-eng tunnel counters
Syntax Description This command has no a
rguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines This command allows you to set the MPLS traffic engineering tunnel counters to zero so that you can
see changes to the counters easily.
Examples In the following example, the counters for all MPLS traffic engineering tunnels are cleared and a request
is m
ade for confirmation that the specified action occurred:
Router# clear mpls traffic-eng tunnel counters
Clear traffic engineering tunnel counters [confirm]
Related Commands
Release Modification
12.0(14)ST This command was introduced.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
show mpls traffic-eng tunnels statistics Displays event counters for one or more MPLS traffic
en
gineering tunnels.