Specifications

traffic-engineering route
MP-842
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Examples The following example shows how to configure a traffic engineering filter and a traffic engineering route
for that filter through an LSP-encapsulated tunnel for the traffic engineering routing process:
Router(config)# router traffic-engineering
Router(config-router)# traffic-engineering filter 5 egress 10.0.
0.1 255.255.255.255
Router(config-router)# traffic-engineering route 5 tunnel 5
Related Commands Command Description
show ip traffic-engineering
conf
iguration
Displays information about configured traffic engineering
filters and routes.
show ip traffic-engineering routes Displays information about the requested filters
c
onfigured for traffic engineering.