Specifications

tunnel flow egress-records
MP-847
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
tunnel flow egress-records
To create a NetFlow record for packets that are encapsulated by a generic routing encapsulation (GRE)
tunnel when both NetFlow and Cisco Express Forwarding are enabled, use the tunnel flow
egress-records command in interface configuration mode. To disable NetFlow record creation, use the
no form of this command.
tunnel flow egress-records
no tunnel flow egress-records
Syntax Description This command has no arguments or keywords.
Defaults A NetFlow record for encapsulated packets is not created.
Command Modes Interface configuration
Command History
Usage Guidelines When this command is enabled on a GRE tunnel with both Cisco Express Forwarding and NetFlow
e
nabled, a NetFlow record is created for packets that are encapsulated by the tunnel.
Examples The following example shows how to enable NetFlow record creation:
Router(config-if)# tunnel flow egress-records
Related Commands
Release Modification
12.2(2)T This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Command Description
show ip cache flow Displays NetFlow switching statistics.