Specifications

vrf selection source
MP-892
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
vrf selection source
To populate a single source IP address, or range of source IP addresses, to a VRF Selection table, use
the vrf selection source command in global configuration mode. To remove a single source IP address
or range of source IP addresses from a VRF Selection table, use the no form of this command.
vrf selection source sour
ce-IP-address source-IP-mask vrf vrf-name
no vrf selection source sour
ce-IP-address source-IP-mask vrf vrf-name
Syntax Description
Defaults No default behavior or values.
Command Modes Global configuration
Command History
Usage Guidelines If a VRF table is removed by using the no
ip vrf vrf-name command in global configuration mode, all
configurations associated with that VRF will be removed including those configurations added with the
vrf selection source command.
source-IP-address New source IP address to be added to the VRF Selection table.
source-IP-mask IP mask for the source IP address or range of single source IP addresses to
b
e added to the VRF Selection table.
vrf vr
f-name Name of the VRF Selection table to which the single source IP address or
range of source IP addresses should be added.
Release Modification
12.0(22)S This command was introduced.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.0(24)S This command was integrated into Cisco IOS Release 12.0(24)S.
12.2(14)SZ This command was integrated into Cisco IOS Release 12.2(14)SZ to
s
upport the Cisco 7304 router.
12.2(18)S This command was integrated into Cisco IOS Release 12.2(18)S to support
th
e Cisco 7304 router.
12.0(26)S This command was integrated into Cisco IOS Release 12.0(26)S to support
t
he Cisco 7200 and 7500 series routers.
12.2(25)S This command was integrated into Cisco IOS Release 12.2(25)S to support
t
he Cisco 7200 and 7500 series routers.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.