Specifications

xconnect logging pseudowire status
MP-900
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
xconnect logging pseudowire status
To enable system logging (syslog) reporting of pseudowire status events, use the xconnect logging
pseudowire status command in global configuration mode. To disable syslog reporting of pseudowire
status events, use the no form of this command.
xconnect logging pseudowire status
no xconnect logging pseudowire status
Syntax Description This command has no arguments or keywords.
Defaults Syslog reporting of pseudowire status events is off.
Command Modes Global configuration
Command History
Usage Guidelines Use this command to enable syslog reporting of pseudowire status events.
Examples The following example enables syslog reporting of pseudowire status events:
xconnect logging pseudowire status
Related Commands
Release Modification
12.0(31)S This command was introduced.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
Cisco IOS XE Release
2.
4
This command was integrated into Cisco IOS XE Release 2.4.
Command Description
xconnect Binds an Ethernet, 802.1q VLAN, or Frame Relay attachment circuit to a
L
2TPv3 pseudowire for xconnect service and enters xconnect configuration
mode.