Specifications

Multiprotocol Label Switching Commands
description (l2 vfi)
MP-57
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
description (l2 vfi)
To provide a description of the switching provider edge (PE) router for an L2VPN multisegment
pseudowire, use the description command in L2 VFI configuration mode. To remove the description,
use the no form of this command.
description st
ring
no description string
Syntax Description
Command Default The switching PE router does not have a description.
Command Modes L2 VFI (config-vfi)
Command History
Usage Guidelines This description is useful for tracking the status of each switching PE router.
Examples This example adds a description for switching PE router 2:
Router(config)# l2 vfi domain_a point-to-point
Router(config-vfi)# description s-pe2
Related Commands
string Switching PE router description. The string must be 80 characters or fewer.
Release Modification
Cisco IOS XE Release
2.
3
This command was introduced.
Command Description
show mpls l2 transport
vc
detail
Displays the status information about the pseudowire, including the
switching PE router.