User's Manual

ALPHA 9500 Interim OPERATING MANUAL

www.alpharadioproducts.com

Figure 4.2

Transformer Installation

1. On a ﬂat surface, with plenty of room, carefully

rotate the ampliﬁer on to its right side (power sup-

ply/transformer side). Rotate the transformer onto

its right side, placing the transformer squarely on the

transformer shim.

2. Slowly move the ampliﬁer and transformer togeth-

er making sure to align the nuts on the transformer

with screw holes in the bottom of the ampliﬁer.

3. Once the transformer is settled into position and

the screw holes are aligned, secure the tranformer

into place from the bottom of the ampliﬁer. Insert

the supplied bolts (1/4 / 20, ½” hex bolts) with ¼”

washers through the four clearance holes in the chas-

sis and into the nuts in the transformer base. Once

the transformer is secure you may carefully rotate the

amplﬁer back to its standard orientation.