User's Manual

ALPHA 9500 Interim OPERATING MANUAL

www.alpharadioproducts.com

proper lifting techniques and two people when moving the ampliﬁer.

• The Alpha 9500 is designed to meet international safety standards and FCC regulations.

However, one should always remember that the equipment works with high voltages that

can be LETHAL!

This operating manual holds information, cautions and warnings that must be followed to ensure

safe installation and operation. Read Chapter 1 before attempting to unpack or operate the

Alpha 9500 ampliﬁer.

Warnings: What Not to Do

• Never open the ampliﬁer case without unplugging the unit from the wall outlet.

• Never stick objects into holes in the case.

• Never touch an antenna during transmission.

• Never attempt to turn on the ampliﬁer without the cover securely in place (all

attachment screws reinserted).

• Never turn the ampliﬁer back on after a hard fault without waiting at least 20

seconds.

• Always resist the temptation to immediately hit the ON button after the

ampliﬁer faults to power off.

• Never allow liquids to enter the ampliﬁer through the cover holes.

• Never cover or obscure the exhaust holes in the cover of the amp.

Warnings posted in this manual should be read and thoroughly understood

by users. Failure to perform procedures properly may result in ampliﬁer

damage, ﬁre hazard, or electric shock.

1.5 Owner Assistance

Technical Assistance from Alpha Radio Products is available from several sources.

• The Alpha Radio Products web site is www.alpharadioproducts.com. Click on Support and

follow the instructions. Many typical problems and their solutions are listed on this site. On

this site you can get the following assistance:

• Technical Support

• Repair Information

• Software Downloads

• Manuals