Bluetooth Headset Model Name: E400 FCC ID: X6HE400
E400 MONO Bluetooth Headset Spec（CSR8620） Operating Instuctions ■Power ON： When the headset is off,turn the switch to the ON position,The led indicator will flash in blue. You will hear the word “Hello”from the speaker of the headset.The headset will be paired with the last connected bluetooth device or mobile phone automatically when turned on. It will remind if it connected. If No,it will automatically into Pairing Mode.and hear “discovering”from the headset.
When the headset is off,turn the switch to the ON position and waiting for 5seconds until the LED indicator flashes red and blue in alternating colors.You will hear the word”Discovering” from the speaker of the headset. ■Easy Pairing Function： If the headset donesn’t connect with any phone when it’s ON,you will need to enter the headset into pairing mode by pressing Vol+ and Vol- concurrently.
■Switching Between Your Mobile Phone and Headset： When talking on the phone,double-click the MFB to switch the voice from your headset to your mobile phone .By double clicking the MFB again,the voice will switch back to the headset.You will hear the words”Transfer Audio” from the speaker of the headset. ■Reconnect: When the headset and mobile phone are disconnected,you will hear the words”Your Device is Disconnected”. If you press the MFB,it will reconnect.
E.Now you should have two mobile phones connected with the headset. ■Transfer Calls : When you are talking on the phone(AG1) and have another incoming call (AG2),press the MFB for 2 seconds to rejected the incoming call,still talking with AG1. If you click V+ and V- concurrently,you will receive the incoming call.Your first call will be placed on hold. When you click V+ and V- concurrently again,you will switch back to your first call.
LED Indicator Status Charging Red LED Light Charging Completed Blue LED Light Power ON (Connected) Blue LED Light flashes once every 3 seconds Power ON(Talking) Blue LED Light flashes once every 3 seconds Power ON(Incoming Call) Blue LED light flashes continuously Music Playing Blue LED light flashes three every 5 seconds Power ON(Not Connected) Blue LED light flashes once every 5 seconds Battery Low Red LED light flashes once every 20 seconds with the words “Battery Low” Pairing Mode LED l
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
