Specifications

We reserve the right to modify technical specifications without prior notice.

83050800aUK – Translation of the operating manual © Alpha-InnoTec GmbH

Then, on the opposite side, latch the lugs on

the masking plate from the bottom up into the

slots provided in the front panel…

Finally, press the upper latching lugs of the masking

plate into the slots provided in the front panel.

dismantling the masking plate

In order to dismantle the masking plate, the latching

lugs must be completely released on one side rst by

pushing towards the middle of the masking plate.

Then release the lugs on the opposite side.

Installation and removal of the

screen

installing the sCreen

NOTE.

The masking plate is provided in the as delivered

unit so that the control panel is inserted in the

upper recesses of the front panel.

If the control panel has been inserted in the

lower recesses of the front panel, you must rst

remove the masking plate's dummy cover and

then reinsert it above the logo.

Screen at time of delivery:

1 Recess for control panel

2 Logo

3 Dummy cover

First, insert the masking plate below in the slots

provided in the front panel…

Then, beginning on one side, latch the lugs on the

masking plate from the bottom up into the slots

provided in the front panel…