Owner`s manual

Page 4 Eagle/Roadrunner Configuration Information
AMOS32.INI File (cont.)
;
LOAD SYSTEM.LIT
SYSTEM SYSMSG.USA
SYSTEM DCACHE.SYS/N/M/U 300K
;SYSTEM DVR:DSK/N 100K 60
SYSTEM CMDLIN.SYS
SYSTEM SCNWLD.SYS
SYSTEM QFLOCK.SYS
SYSTEM TRM.DVR[1,6]
SYSTEM STR.DVR[1,6] ; streaming tape driver
;SYSTEM FLP.DVR[1,6] ; 3-1/2" floppy driver
;SYSTEM MIN.DVR[1,6] ; 5-1/4" floppy driver
;SYSTEM EGP.DVR[1,6] ; parallel port driver - Eagle 100/200
;SYSTEM EPP.DVR[1,6] ; parallel port driver - Eagle 300-500
;SYSTEM SEP.DVR[1,6] ; parallel port driver - Super Eagle (550)
;SYSTEM ACD.DVR[1,6] ; Alpha CD-ROM driver
;SYSTEM DVR:AM319S.LDV/N ; EtherNet LAN driver for Super Eagle
SYSTEM
;
DEL SYSTEM
;
;SMEM.LIT 300K ; Shared Memory Pool for AMOS 2.2C (or later)
;
LOG OPR:
SYSTEM SERVICE
SET SEEKOP DSKO: ; Disk Seek Optimization for AMOS 2.2C (or later)
LOG SYS:
;
DET DSKERR
SET HEX
;
;SETJOB JOB2,TRM2,300K,JOBSET.INI
;
LOAD MOUNT.LIT
MOUNT DSK1:
MOUNT DSK2:
MOUNT DSK3:
MOUNT DSK4:
MOUNT DSK5:
;
DEL *
;
CACHE
OFF
ON
LOCK/MFD DSK0:
LOCK/UFD DSK0:[1,4]
LOCK/FILE VUE.LIT,COPY.LIT,DIR.LIT
EXIT
;
DO SCZRR.MSG
;
MEMORY 0
To enable the write buffering feature, you simply remove the semicolon at the beginning of the line. However, before you
do this, read the section in this document that explains the benefits and risks associated with this feature.
When you boot your Eagle computer, a message will be displayed reminding you that the high performance SCSI dispatcher
needs to have its PIC code entered. Once you have entered the PIC for the dispatcher, you will propably want to delete
the message command (DO SCZRR.MSG) from your AMOS32.INI file.
SCSI Dispatcher PIC Message
Write Buffering Enable
Write buffering enable statement
Message instructing you to enter the PIC and
enable the high-performance dispatcher
MC1130
PDI-03500-50, Rev. B00