Specifications

Page 14 Installation Instructions: Roadrunner 030 & 040 AM-1000 / AM-1200 Upgrade
Very little force is required to install a SIMM module. If you’re having problems getting
the SIMM module installed in the connector, stop and take a moment to examine both
the SIMM module and the connector. Make sure you are installing the SIMM as shown
in the illustration.
Once the memory is installed, you must set the memory configuration jumpers based on
the capacity of the SIMM module. A table showing how these jumpers are configured is
shown in the AM-172 and AM-174 Roadrunner board illustrations.
METAL RETAINER
CLIP
METAL RETAINER
CLIP
MAKE SURE THIS CURVE
IN THE SIMM CARD ALIGNS
WITH PIN-1 IN THE
SIMM CONNECTOR.
PIN-1 INDICATOR
SIMM
CONNECTOR
MC1059
SIMM (SINGLE INLINE
MEMORY MODULE)
Roadrunner SIMM Module Installation
PDI-00172-10, Rev. A03