Specifications

Page 36 Installation Instructions: Roadrunner 030 & 040 AM-1000 / AM-1200 Upgrade
Table 1. Front Panel Status Codes Generated by the Monitor
CODE MEANING
4 System is out of QUEUE blocks.
8 A/C power dropped below an acceptable level.
9 Memory parity error.
10 An interface driver (.IDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
11 A terminal driver (.IDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
12 System Initialization Command file was not found.
Table 2. Front Panel Status Codes Generated by the Boot PROMS
CODE MEANING
F System is now clearing and sizing memory.
10 Roadrunner has determined the computer booting in an AM-1000
or AM-1200 computer.
20 The system is beginning to execute the boot PROM. An error at
this point indicates your computer has a faulty PROM. Contact
your dealer.
21 The system is transferring the instructions from the PROM into its
Random Access Memory (RAM). If an error occurs here, your
computer might have a bad PROM or bad memory.
22 The system is generating a checksum of the instructions in
Random Access Memory. If this calculated checksum doesn’t
match the checksum coded into the instructions themselves, you
see a "2E" error code.
PDI-00172-10, Rev. A03