Specifications
Page 38 Installation Instructions: Roadrunner 030 & 040 AM-1000 / AM-1200 Upgrade
Table 2 (continued)
CODE MEANING
xb The system is beginning to execute the AMOS monitor program.
If an error occurs at this point, try reloading the latest version of
the system software.
xd System bootup failed because of a time-out error. This code may
indicate faulty memory or an addressing problem.
2E System bootup failed because of a bootstrap loader program
checksum error. This code may indicate a bad PROM or bad
memory.
xF System bootup failed because of an invalid boot device selection.
Check the boot ID switches on the back panel of your computer.
See Chapter 2 for the proper settings.
Other status codes can appear during self test; these codes are discussed in the
Alpha
Micro Self Test User’s Guide
.
16.0ROADRUNNER LOGO
Your product installation kit includes a special Roadrunner logo. This logo, which is
shown below, should be affixed to your computer’s front panel after the Roadrunner
hardware has been installed.
030
The illustration above shows the 030 logo. If you ordered an AM-174 Roadrunner 040,
your product installation kit will include an 040 Roadrunner logo.
PDI-00172-10, Rev. A03