Specifications
APPENDIX E
FCC CLASS A EMISSION CONTROL
REQUIREMENTS
In order to insure that your Roadrunner enhanced computer complies with FCC Class A
rules and regulations, it must have the following equipment, and (or) modifications.
E.1FERRITE CLAMP
Your product installation kit includes a special ferrite clamp (IND-00010-40) that clamps
around the two 34-pin cables extending between the AM-985 board and the Roadrunner
board. The ferrite clamp is a hinged assembly that simply slips around the cables and
snaps together. In order to be effective, the clamp must be positioned on the cables as
close as possible to the Roadrunner board. The ferrite clamp assembly is shown in
Figure E-1.
MAC944
FERRITE CLAMP
(IND-00010-40)
Figure E-1. Ferrite Clamp Assembly
PDI-00172-10, Rev. A03