Specifications

Page A-3Configuring AMOS SCSI Disk Drives
All other user will users will be suspended while VCRSAV is running.
Enter RETURN to continue or CTRLC to abort:
RETURN
The tape you have created will be compatible with your new 80MB SCSI disk drive.
Once you have installed your new drive, use your WARMBOOT tape to boot your new
drive. To restore the software enter the following command:
VCRRES ALL:*.*[]=ALL:*.*[]
RETURN
A.1.2SCSI Drivers
It is not necessary to create a special boot driver for SCSI drives using FIXLOG. There
is a generic SCSI driver in account [1,6] that is used for creating SCSI bootable AMOS
Monitors, SCZDVR.DVR.
A.1.3MONGEN the Monitor
Use the MONGEN program to embed the appropriate SCSI driver in the AMOS
monitor located in account [1,4] on your SCSI drive:
Example:
Enter: MONGEN
RETURN
Input monitor name: LSYS.MON
RETURN
New disk driver: SCZDVR.DVR
RETURN
New language definition table name: ENGLSH
RETURN
New monitor name: AMOSL.MON
RETURN
Enter: SAVE AMOSL.MON
RETURN
A.1.4System Initialization Command File
The System Initialization Command File (AMOSL.INI) for SCSI drives is easy to setup,
due largely to the self-configuring nature of the SCSI drive.
PDI-00436-20, Rev. A15