Specifications

APPENDIX E
AM-436-15 (-23) 324MB SCSI DRIVE
50-PIN CONNECTOR
PIN #1
DC
POWER
TERMINATORS
MOTOR START ON COMMAND
JUMPER DO NOT REMOVE
FACTORY CONFIGURED JUMPER
DO NOT REMOVE
DRIVE SELECT "0"
DRIVE SELECT "1"
DRIVE SELECT "2"
DRIVE SELECT "3"
SCSI I.D.
MODEL #
FORMATTED
CAPACITY
NUMBER
OF LOGICALS
BITMAP
SIZE
FORMAT
INTERLEAVE
ALPHA MICRO
PART NUMBER
LXT-340SY 324MB
PDB-00436-15 (-23)
11
3778 1
MAC829
J9
J6
J8
= JUMPER INSTALLED
MAXTOR 3-1/2" SCSI DISK DRIVE
Parity must be "enabled,"
install a jumper at this position.
SERIES 90 (ONLY)
SPECIAL INSTRUCTIONS
IN = Drive supplies termination power
for the SCSI bus.
OUT = Drive does not supply termination
power for the SCSI bus.
TERMINATION POWER JUMPER
Figure 1 — Maxtor 324MB 3-1/2" SCSI Drive
Maxtor LXT-340SY drives with part numbers ending in dash number (-15) are shipped
with a mounting bracket designed for 5-1/4" mounting applications.
PDI-00436-20, Rev. A15