Specifications

APPENDIX F
AM-436-20(-00) 40MB and
AM-436-21(-11) 80MB SCSI Drives
50-PIN CONNECTOR
PIN #1
TERMINATORS
MODEL # FORMATTED
CAPACITY
NUMBER
OF LOGICALS
BITMAP
SIZE
FORMAT
INTERLEAVE
ALPHA MICRO
PART NUMBER
7040SR 40MB
PDB-00436-20 (-00)
2
2560 1
MAC830
= JUMPER INSTALLED
J601
J603
J605
PDB-00436-21 (-11)
7080SR 80MB 3 3413 1
MAXTOR 3-1/2" SCSI DRIVE
Parity must be "enabled,"
remove jumper at this position.
SERIES 90 (ONLY)
SPECIAL INSTRUCTIONS
J604
J602
RP601 RP602
J1
FACTORY PRESET
Drive spins-up when
power is applied.
SCSI I.D. 0
SCSI I.D. 2
SCSI I.D. 1
SCSI I.D. 3
J602 J602
J602 J602
SCSI DRIVE I.D.
IN = Drive supplies termination power
for the SCSI bus.
OUT = Drive does not supply termination
power for the SCSI bus.
TERMINATION POWER JUMPER
Figure 1 — Maxtor 40 and 80MB 3-1/2" SCSI Drives
PDI-00436-20, Rev. A15