Specifications

Page J-2 AM-436-44 1.2GB and AM-436-45 540MB SCSI Drives
Maxtor MXT drives with 1.2 firmware can only be used in Series 90 applications. Maxtor
MXT drives with special 6F+ firmware can only be used in Roadrunner and AM-190
applications. MXT drives that include 6F+ firmware will have a sticker affixed to the rear
of the drive indicating the firmware revision. Maxtor MXT drives with 1.5 (or later)
firmware can be used on all Alpha Micro Series 90 and AMOS applications that support
SCSI disk drives. Maxtor’s 1.5 (or later) version of the firmware supersedes all previous
versions of the firmware, including 1.2 and 6F+.
SCSI disk drives used in AMOS 680X0 based computers must be installed with the
drive’s signal ground isolated from the computer’s chassis ground. Before installing
your new disk drive, see Section 10 (in this document) dealing with drive isolation in
AMOS based products.
PDI-00436-20, Rev. A15