User's Manual

2.3 Engineering Requirements
# Feature Detailed Description
2.3.1
Transmit Power
Level

The maximum allowable RF power level is subject to
specified nation regulation
2.3.2
Operation Channel
Frequencies

Refer to sub clause 17.3.8.3, IEEE 802.11a for US and
Canada
Channel 1: 5180MHz
Channel 2: 5200MHz
Channel 3: 5220MHz
Channel 4: 5240MHz
Channel 5: 5260MHz
Channel 6: 5280MHz
Channel 7: 5300MHz
Channel 8: 5320MHz
Channel 9: 5745MHz
Channel 10: 5765MHz
Channel 11: 5785MHz
Channel 12: 5805MHz
Channel 13:5825MHz

Refer to ARIB STD-T71 for Japan
Channel 1: 5170MHz
Channel 2: 5190MHz
Channel 3: 5210MHz
Channel 4: 5230MHz

Refer to EN 301 893 draft for Europe
Channel 1: 5180MHz
Channel 2: 5200MHz
Channel 3: 5220MHz
Channel 4: 5240MHz
Channel 5: 5260MHz
Channel 6: 5280MHz
Channel 7: 5300MHz
Channel 8: 5320MHz
Channel 9: 5500MHz
Channel 10: 5520MHz
Channel 11: 5540MHz
Channel 12: 5560MHz
Channel 13: 5580MHz
Channel 14: 5600MHz
Channel 15: 5620MHz
Channel 16: 5640MHz
Channel 17: 5660MHz
Channel 18: 5680MHz
Channel 19: 5700MHz
2.3.3
Transmit Center
Frequency
Tolerance

Refer to sub clause 17.3.9.4, IEEE 802.11a

The transmitted center frequency tolerance is +/- 20ppm
maximum.
2.3.4
Transmit
Modulation
Accuracy

Refer to sub clause 17.3.9.6, IEEE 802.11a
 The relative constellation RMS error, averaged over sub
carriers, OFDM frames, and packets, do not exceed a
data-rate dependent value as follows.
Max. –5dBr at 6Mbps
Max. –25dBr at 54Mbps
2.3.5
Slot Time  Refer to sub clause 17.3.8.6, IEEE802.11a
 The slot time for the OFDM PHY is less than 9 µs,
which is the sum of the RX-to-TX turnaround time,